Our advancement depends on the superior gear, superb talents and consistently strengthened technology forces for LSZH Cable, High Voltage Silicone Wire, Trailing Cable. We always take innovation and technology as the development direction, repay the new and old customers with the highest quality and most efficient products, so as to maximize the interests of customers. We firmly implement the laws and regulations of the country and the region in which we operate, and abide by and uphold industry norms. We make individuals and organizations grow together and build a broad stage for the development of talents.
Description for Flat Ribbon Cable:
26AWG or 28AWG 1.27mm PH Flat Ribbon Cable,UL FLAT RIBBON WIRE Gray with Red line
UL Style:2651
Rated temperature:105℃
Rated voltage: 300Volt
Flame retardant : VW-1 vertical flame test
Conductor for flat ribbon cable
Material: tinned copper
AWG size: 26AWG gauge,24 pin
Number of strands in each conductor:7/0.16mm
Lay of strands in each conductor:0.5 inch at least
Cross section area:156 Circular mil
Insulation of Signal flat ribbon cable:
Material of insulation: Polyvinl chloride(PVC)Gray ROHS environmental material
Insulation thickness average: 9mil
Minimum insulation thickness: 7mil
Physical Properties for Flat Ribbon Cable:
After seven days air oven at 136℃
Average tensile strength:1500 Ibs/inch2
Percent of original:70% at least
Average elongation:200%
Percent of original:65% at least
Electrical Characteristic of flexible flat signal cable
Spark test:2500Volts
Dielectric strength test:Minimum2000Volts
Conductor resistance:Maximum148Ω/KM
Insulation resistance: Maximum100MΩ/KM
Capacity:40pF/M
Inductance:1.45µH/M
Propagation delay time:4.2ns/m
Technical data for 8pin 24 pin Conductor 26awg 28 gauge Flat ribbon wire
Description:
26AWG or 28AWG 1.27mm PH Flat Ribbon Cable,UL FLAT RIBBON WIRE Gray with Red line
UL Style:2651
Rated temperature:105℃
Rated voltage: 300Volt
Flame retardant : VW-1 vertical flame test
Conductor for ribbon flat cable
Material: tinned copper
AWG size: 26AWG gauge,24 pin
Number of strands in each conductor:7/0.16mm
Lay of strands in each conductor:0.5 inch at least
Cross section area:156 Circular mil
Insulation of flat ribbon cable:
Material of insulation: Polyvinl chloride(PVC)Gray ROHS environmental material
Insulation thickness average: 9mil
Minimum insulation thickness: 7mil
Physical Properties for flat ribbon wire:
After seven days air oven at 136℃
Average tensile strength:1500 Ibs/inch2
Percent of original:70% at least
Average elongation:200%
Percent of original:65% at least
Electrical Characteristic of flexible Signal Flat Ribbon Cable
Spark test:2500Volts
Dielectric strength test:Minimum2000Volts
Conductor resistance:Maximum148Ω/KM
Insulation resistance: Maximum100MΩ/KM
Capacity:40pF/M
Inductance:1.45µH/M
Propagation delay time:4.2ns/m
Technical data for 8pin 24 pin Conductor 26awg 28 gauge Flat ribbon wire
Coded | Number | Size of conductor | Thickness | Width | Allowable | |
No | Of Cores | (AWG) | Composition | (mm±0.1) | Tolerance (mm) | |
TA-08 | 8 | 26 | 7/0.16±0.008mm | 0.90 | 10.16mm | ±0.20 |
TA-24 | 24 | 26 | 7/0.16±0.008mm | 0.90 | 30.48mm | ±0.20 |
Drawing for 8 pin Flat ribbon cable
UL 2651 Technical specification for 8conductor,9 core,......30conductor,40core,50conductor,60 conductor till 64conductor with 28AWG Gray flat ribbon cable
UL style | Maximum use temperature | Maximum operating voltage | Number of conductor | Conductor size | Finished outer diameter | ||
Size | Copper Wire number/wire diameter | Thickness mm±0.05 | Width mm±0.2 | ||||
AWG | No./mm±0.05 | ||||||
2651 | 105℃ | 300V | 8 | 28 | 7/0.127 | 0.90 | 10.16 |
9 | 28 | 7/0.127 | 0.90 | 11.43 | |||
10 | 28 | 7/0.127 | 0.90 | 12.70 | |||
12 | 28 | 7/0.127 | 0.90 | 15.24 | |||
14 | 28 | 7/0.127 | 0.90 | 17.78 | |||
16 | 28 | 7/0.127 | 0.90 | 20.32 | |||
20 | 28 | 7/0.127 | 0.90 | 25.40 | |||
26 | 28 | 7/0.127 | 0.90 | 33.02 | |||
30 | 28 | 7/0.127 | 0.90 | 38.10 | |||
34 | 28 | 7/0.127 | 0.90 | 43.18 | |||
40 | 28 | 7/0.127 | 0.90 | 50.80 | |||
50 | 28 | 7/0.127 | 0.90 | 63.50 | |||
60 | 28 | 7/0.127 | 0.90 | 76.20 | |||
64 | 28 | 7/0.127 | 0.90 | 81.28 | |||
We not only strive to produce high-quality 500MHz Twisted Pairs Shielded CAT6A Cat7 Signal Communication Network Cable and services, but also strive to create a good reputation of our brand. We continue to improve the corporate governance structure, enhance the core competitiveness of the enterprise, and build a large-scale, regionalized and diversified integrated enterprise group. We uphold the concept of customer first and serve customers attentively, and customize personalized services for customers.
Hot Tags: flat ribbon cable, China, suppliers, manufacturers, factory, wholesale, price, in stock, price list, made in China, Flexible Silicone Wire, 11kv 3 core xlpe cable, 16mm 3 core xlpe cable, Industry Cable, 4 core shielded signal cable, Neoprene Cable











